1.
A new engine service is better than fitting the EZ-Stab?
EZ-Stab
works by protecting and improving the electrical system. It is a
permanent safeguard and helps the ECU work better. Car performance
is indirectly enhanced. Engine service is a periodic maintenance
exercise. A car without EZ-Stab cannot reach its peak performances.
2. Can EZ-Stab take the heat, vibration?
Humidity and shock in the car engine compartment?
EZ-Stab is made of high quality ABS plastic
with heat resistance. Unless the unit is made to make direct contact
with the exhaust manifold, there is no danger. EZ-Stab has been
tested in vehicles make many rounds up and down the Malaysian high
way with no trouble found.
3. EZ-Stab works better for Auto cars
only?
Well, there is some truth in it (mainly
because of the driver’s subjective perception!). The reason
is manual cars depends less on ECU on many functions. For auto vehicles,
EZ-Stab will make the gearshift more positive, and will reduce wear
and tear. No one enjoy diving an indecisive gear change system.
On more than 10 manual Vios/Corolla, here are
the latest update: gear shift is easier, overtaking kick down to
3rd gear is more positive and engine can rev much higher to 4000rpm
pulling the car forward. Also, EZ-Stab cures the hesitation around
3000rpm when throttle is suddenly opened.
4. Fitting a new
set of plugs is the same as fitting the EZ-Stab?
No. Even with Iridium plugs, rough idling and slower pick up is
still present on many engines. The EZ-Stab can help the engine perform
better compared to fitting new plugs. EZ-Stab also outlasts plugs!
5. How would I know
if EZ-Stab really works for my car?
After about a few seconds or minutes the EZ-Stab is attached to
the battery, one can observe the engine gradually smoothen out during
idling. In many cases, the engine rpm drops slightly. The voltage
is stabilized because the engine rpm is more stable and not erratic.
On some cars, the ECU may need longer time to adjust to a much cleaner
electrical environment. Once the engine ECU adapts to the benefits
of the EZ-Stab, the car will be smooth during idling, quick in acceleration
and more stable at high spends. It will then be very difficult for
any driver to drive again without the EZ-Stab. To confirm the effectiveness
of the EZ-Stab, simple remove the unit and the engine idling will
immediately become unstable, and the response more sluggish.
6. How good is your
customer support?
Well, we treat everyone here as friends than customers. When we
find someone is using EZ-Stab to cheat money, we will get rid of
him. We replace faulty sets with no questions asked.
Back
to Top
7. Is the EZ-Stab
only suitable for Toyota cars?
No, EZ-Stab has been tested in many other makes such as Honda, Mazda,
Nissan, etc. Even many European vehicles such as BMW, Rover, and
Renault also can be much improved by the EZ-Stab.
8. Is it difficult
to install the EZ-Stab?
EZ-Stab takes less than 1 minute to install in a Toyota Corolla,
and longer on other types of battery terminals. All EZ-Stab needs
is a (+) and (-) of the battery.
9. Is EZ-Stab compatible
with other add on gadgets such as Pivot?
EZ-Stab has been proven to have no side effects with all other after
market accessories. EZ-Stab works in harmony with Pivot and Hot
'Immense' with not troubles reported.
10. Will EZ-Stab
cause fire or short circuit?
EZ-Stab will not catch fire and does not burn. EZ-Stab when not
cause short circuit. Also, EZ-Stab will draw very little power from
the battery; it will take years for EZ-Stab to completely discharge
a battery.
11. What is the working
principal of EZ-Stab?
EZ-Stab is so unique that a patent has been filed in Singapore.
No one disclose their trade secret on line, sorry.
12. What are the
differences of Z-Stab and EZ-Stab?
Both are designed by Jon Wong. EZ-Stab is a much improved version
of Z-Stab. Also, EZ-Stab is to counter the imitations, copies and
manufacture rejects of Z-Stab sold in the market.
13. Where are your
independent Dyno test results? Any Proof?
Please check the technical section for a more indepth writeup
14. Which is better?
Grounding or EZ-Stab?
The new version of EZ-Stab does not require grounding. However,
if you wish to ground it, you can install the spark bridge which
is available for $30.
15. Installation Instructions:
- Inspect the unit to ensure that it is properly sealed and free from enclosure defects.
- Check that there are no burnt marks or exposed wires on the cables.
- The BLACK terminal is negative (-) and the RED terminal is positive (+).
- Secure the BLACK terminal to the negative terminal (-) of the battery first using M6 nut.
- Lightly tap the RED terminal of the EZ-Stab to the positive terminal (+) of the battery. The internal lighting of the EZ-Stab must light up.
- Secure the connection of the RED terminal to the positive terminal (+) of the battery using M6 nut.
- Secure EZ-Stab using industrial mounting tape next to the battery keeping the unit away from heat sources (radiator/engine frame).
WARNING: WRONG POLARITY MAY RESULT IN DAMAGES TO THE SET!
Specifications:
12 Volts DC to 24 Volts DC.
Vehicle alternator rated at less than 120A
Back
to Top
|
